Bears'n'Bulls EA - V1.05g - in forward- & live-test

Post Reply
User avatar
jako
Trader
Posts: 105
Joined: Wed Jun 20, 2012 6:07 pm
Location: Slovensko

Re: Bears'n'Bulls EA - actual version V1.04 - stable

Post by jako »

Thank you all for your help. It was enlightening.
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04 - stable

Post by banzak »

jako wrote:Thank you all for your help. It was enlightening.
Your're welcome.

Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Looking 4 help

Post by banzak »

Hello fellow traders,

I'm looking for help to find setfiles for the following symbols:
SYMBOLS:
  • USDJPY
  • NZDUSD
  • GBPCHF
  • AUDCAD
  • GOLD
  • if you think other symbols will work -> do it
PERIOD
  • 2012-01-02 to 2012-12-29
NOTE
  • try to find settings like you see in Post #1 with fixed lotsize 0.1 (Moneymanagement Off) and a minimum of 5 trades at 10k start.
  • my idea is to find 5 different symbols to put them together on one demo-account. so the most important thing is to have a setfile without loosers
To get the complete tickdata for 2012-01-02 - 2012-12-29 I use tickstory lite. In tickstory you download the data for the symbol -> export it to .csv-file and then import it to your Empty4.

If somebody is interested in or need help with something please send my a PM or post it here.

Thank you & Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
User avatar
cuzgeorge
Trader
Posts: 674
Joined: Mon Mar 05, 2012 10:10 am
Location: Johannesburg, South Africa.

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by cuzgeorge »

Banzak, all,
I'm a little tied up to get into the BTing right now, but can fill you all in that none of my demos running all your work have lost yet.
The only one thats in the crapper at the moment , and for the first time, is v101, with a huge open 10k loss at the moment. I am running OOTB and have never felt the need to intervene except for this one position on v101. I havent done anything about it yet, but will when i get a chance.

I suspect it would have to be a manual intervention because BB does not overtrade, or i might start to play with MPTM on a chart to handle any rogue trades like this one from time to time. WIll forward test and post here what settings i find that work.
Altrnatively, you might prefer work only on the latest version, please advise and i'll do so.

regards and thank you again for the great work.
cuz
10.X, BMac,Xmeter,Marylin,and CaptsNakedTrading thread coupled with Slowkeys Intraday setup for manual trades.
http://www.stevehopwoodforex.com/phpBB3 ... f=36&t=848
harry45
Trader
Posts: 158
Joined: Fri Nov 18, 2011 11:36 am
Location: Russia,St.Petersburg

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by harry45 »

Hi Banzak,
please pay attention to the late opening of orders.
Exellent EA
Regards
You do not have the required permissions to view the files attached to this post.
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by banzak »

harry45 wrote:Hi Banzak,
please pay attention to the late opening of orders.
Exellent EA
Regards
Hi Harry45,
thank you for that hint, actual I'm working on this with the actual V1.04b. I'm aware that the system
is sometimes to late, but I tried to adjust the parameters and on the downside there are too many losers in the actual BT. :?

The actual strategy enters only if:
LONG - 1st Trade
  • ema5_H1-MinPipsDiff > ema20_H1
  • ema5_H1-ema20_H1 < MaxPipsDiff
  • ema5_H1 > ema5Prev_H1
  • Bulls_M15 > 0
  • Bears_M15 > 0
SHORT - 1st Trade
  • ema5_H1+MinPipsDiff < ema20_H1
  • ema20_H1-ema5_H1 < MaxPipsDiff
  • ema5_H1 < ema5Prev_H1
  • Bulls_M15 < 0
  • Bears_M15 < 0
The trades after are only valid if Bears & Bulls confirm the direction

But I still think there is some problem with the calculations and I didn't figured it out yet.

ps. tell me your opinion/improvements on this strategy

Regards,
Banzak
Last edited by banzak on Wed Jan 30, 2013 7:01 pm, edited 1 time in total.
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by banzak »

cuzgeorge wrote: Altrnatively, you might prefer work only on the latest version, please advise and i'll do so.

regards and thank you again for the great work.
cuz
Hi cuz,
please stay with the versions you have, I will take care of the actual one. It's good for me to see how this versions work, cause i know what the changes are. ;)

I always make a version-jump when I start with new ideas, so I keep always my running systems...
the past experience taught me to do so.. :)

Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
theforexedge
Trader
Posts: 220
Joined: Thu Apr 26, 2012 10:31 pm
Location: Torquay

Re: Looking 4 help

Post by theforexedge »

banzak wrote:Hello fellow traders,

I'm looking for help to find setfiles for the following symbols:
SYMBOLS:
  • USDJPY
  • NZDUSD
  • GBPCHF
  • AUDCAD
  • GOLD
  • if you think other symbols will work -> do it
PERIOD
  • 2012-01-02 to 2012-12-29
NOTE
  • try to find settings like you see in Post #1 with fixed lotsize 0.1 (Moneymanagement Off) and a minimum of 5 trades at 10k start.
  • my idea is to find 5 different symbols to put them together on one demo-account. so the most important thing is to have a setfile without loosers
To get the complete tickdata for 2012-01-02 - 2012-12-29 I use tickstory lite. In tickstory you download the data for the symbol -> export it to .csv-file and then import it to your Empty4.

If somebody is interested in or need help with something please send my a PM or post it here.

Thank you & Regards,
Banzak
Banzak

I'm going to start some forward & back testing for Bulls & Bears..

Can you tell me what input variables can be adjusted? Day Range, Bulls Period, EMA Settings etc!!

JP
stav01
Posts: 7
Joined: Thu Nov 17, 2011 7:45 am

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by stav01 »

Hi Banzak,

Thanks for this EA. Did you consider using Nonlag Bulls Bears (attached) for faster entries?

Regards.
You do not have the required permissions to view the files attached to this post.
User avatar
banzak
Trader
Posts: 79
Joined: Thu Dec 13, 2012 1:54 pm
Location: Zgorzelec / Poland

Re: Bears'n'Bulls EA - actual version V1.04a - stable

Post by banzak »

stav01 wrote:Hi Banzak,

Thanks for this EA. Did you consider using Nonlag Bulls Bears (attached) for faster entries?

Regards.
Hi stav01,
for manual trading sure - for the ea I don't know. this I've to try.

Regards,
Banzak
_________________________________________________________________________
It is better to go on a new path to mislead than to follow the mass on the right track.
Post Reply

Return to “Automated trading systems”